2N® Lift1
The 2N® Lift1 communication solution is designed for two-way emergency communication in the elevator. Its typical use is in elevators where communication is required between the cabin and the control centre or machine room.
This product is not sold through the Axis distribution network, please contact our representative by completing the form.
- A comprehensive solution for single lift
- Powered over phone line
- Supports CPC and P100 protocols
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
A comprehensive solution for one liftYou can rely on 2N® Lift1 for emergency communication from the elevator cabin. Two additional audio units and machine room unit can be attached.
-
Powered over phone lineTake advantage of a single pair of wires for communication and power supply combined. When connected to the 2N® EasyGate PRO, the GSM/UMTS gateway, the unit is kept powered up even in the event of a main power failure.
-
Supports CPC and P100 protocolsCommunicate with the control centre or other monitoring systems using the CPC and P100 protocols.
-
Simple configurationThe configuration can be done locally with the supplied configuration software application or remotely using the voice menu. When connected to the 2N® EasyGate PRO GSM/UMTS gateway, configuration can be changed also using SMS service.
-
Configure up to 9 user profilesEach profile holds a set of parameters. The profile itself is chosen through just one parameters, which changes the entire configuration.
-
Additional audio unitsYou can add up to two additional audio units to the 2N® Lift1 unit, plus one unit to the elevator machine room.
-
4 versions of cabin unitsYou can opt for the basic unit behind the COP panel, a cabled panel unit or a surface mounted unit (‘Compact’ case) or flush mounted.
-
Modernization kitsWe are providing a customized packages including all necessary cabling to match your requirements for elevators modernizations.
-
Up to 6 numbers for alarm calls2N® Lift1 allows you to specify up to 6 numbers for the alarm call, their usage is based on user settings.
-
Standards and certificationsThe high quality design and compatibility with the required standards is proven by TÜV certification EN 81-28/70.
-
Wide range of accessoriesChoose from a wide range of accessories and extension options, such as the induction loop for communicating with the hearing-impaired persons.
Show more
Compatibility with Global Technology Partners
Get to know the wide range of technologies which are compatible with our products.
Technical Specification
Electrical parameters | |
Minimum line current: | 15mA, off the hook |
Minimum line voltage: | 22V, on the hook |
DC voltage drop in the off the hook state: | < 9V, I = 20mA, < 12V, I = 50mA |
Resistance on the hook: | 1MΩ >, U = 25..100V |
Impedance off the hook: | 220Ω + 820Ω paral. 115nF, 15 to 60mA |
Attenuation: | > 14dB, 15 to 60mA |
Bandwidth: | 300 to 3500Hz, 15 to 60mA |
Impedance while ringing: | > 2kΩC = 0.47µF, 25 to 50Hz |
Ringtone detection sensitivity: | 10 to 20V, 25 to 50Hz |
Pulse dialling: | 40 / 60ms |
Tone-dial levels: | -9.0 +2.0/-2.5dB and -11.0dB +2.5/-2.0dB, 15 to 60mA |
Power surge protection – differential between A, B leads: | 1000V (8 / 20µs) |
Note: Any ringing sequence is acceptable. |
Switch parameters | |
Minimum voltage: | 9V AC or DC |
Minimum voltage: | 24V AC or DC |
Maximum current: | 1A AC or DC |
Resistance – open: | min 400kΩ |
Resistance – closed: | approx. 0.5Ω |
Fuse: | resettable |
Connection of external indicator elements | |
Power supply voltage: | 12-24V DC, external source |
Maximum switching current: | 200mA |
Other parameters | |
Dimensions of the Universal implementation: | 2.559 × 5.118 × 0.945 inch |
Dimensions of the Kompakt implementation: | 3.937 × 7.283 × 0.63 inch |
Operating temperature range: | -4°F – 158°F |
Show more
Typical Usage
Technical area
FAQ
Are you still looking for more information? Check out the frequently asked questions and answers.
See more Compatibility with Global Technology Partners
Get to know the wide range of technologies which are compatible with our products.
Technical Specification
Electrical parameters | |
Minimum line current: | 15mA, off the hook |
Minimum line voltage: | 22V, on the hook |
DC voltage drop in the off the hook state: | < 9V, I = 20mA, < 12V, I = 50mA |
Resistance on the hook: | 1MΩ >, U = 25..100V |
Impedance off the hook: | 220Ω + 820Ω paral. 115nF, 15 to 60mA |
Attenuation: | > 14dB, 15 to 60mA |
Bandwidth: | 300 to 3500Hz, 15 to 60mA |
Impedance while ringing: | > 2kΩC = 0.47µF, 25 to 50Hz |
Ringtone detection sensitivity: | 10 to 20V, 25 to 50Hz |
Pulse dialling: | 40 / 60ms |
Tone-dial levels: | -9.0 +2.0/-2.5dB and -11.0dB +2.5/-2.0dB, 15 to 60mA |
Power surge protection – differential between A, B leads: | 1000V (8 / 20µs) |
Note: Any ringing sequence is acceptable. |
Switch parameters | |
Minimum voltage: | 9V AC or DC |
Minimum voltage: | 24V AC or DC |
Maximum current: | 1A AC or DC |
Resistance – open: | min 400kΩ |
Resistance – closed: | approx. 0.5Ω |
Fuse: | resettable |
Connection of external indicator elements | |
Power supply voltage: | 12-24V DC, external source |
Maximum switching current: | 200mA |
Other parameters | |
Dimensions of the Universal implementation: | 2.559 × 5.118 × 0.945 inch |
Dimensions of the Kompakt implementation: | 3.937 × 7.283 × 0.63 inch |
Operating temperature range: | -4°F – 158°F |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more Sales Area
Request information Selling Propositions
- A comprehensive solution for one liftYou can rely on 2N® Lift1 for emergency communication from the elevator cabin. Two additional audio units and machine room unit can be attached.
- Powered over phone lineTake advantage of a single pair of wires for communication and power supply combined. When connected to the 2N® EasyGate PRO, the GSM/UMTS gateway, the unit is kept powered up even in the event of a main power failure.
- Supports CPC and P100 protocolsCommunicate with the control centre or other monitoring systems using the CPC and P100 protocols.
- Simple configurationThe configuration can be done locally with the supplied configuration software application or remotely using the voice menu. When connected to the 2N® EasyGate PRO GSM/UMTS gateway, configuration can be changed also using SMS service.
- Configure up to 9 user profilesEach profile holds a set of parameters. The profile itself is chosen through just one parameters, which changes the entire configuration.
- Additional audio unitsYou can add up to two additional audio units to the 2N® Lift1 unit, plus one unit to the elevator machine room.
- 4 versions of cabin unitsYou can opt for the basic unit behind the COP panel, a cabled panel unit or a surface mounted unit (‘Compact’ case) or flush mounted.
- Modernization kitsWe are providing a customized packages including all necessary cabling to match your requirements for elevators modernizations.
- Up to 6 numbers for alarm calls2N® Lift1 allows you to specify up to 6 numbers for the alarm call, their usage is based on user settings.
- Standards and certificationsThe high quality design and compatibility with the required standards is proven by TÜV certification EN 81-28/70.
- Wide range of accessoriesChoose from a wide range of accessories and extension options, such as the induction loop for communicating with the hearing-impaired persons.
Show more
Compatibility with Global Technology Partners
Get to know the wide range of technologies which are compatible with our products.
Related Norms and Certificates
The quality of our products is crucial to us and our customers, which is why they fully comply with strict European Union standards.
Technical Specification
Electrical parameters | |
Minimum line current: | 15mA, off the hook |
Minimum line voltage: | 22V, on the hook |
DC voltage drop in the off the hook state: | < 9V, I = 20mA, < 12V, I = 50mA |
Resistance on the hook: | 1MΩ >, U = 25..100V |
Impedance off the hook: | 220Ω + 820Ω paral. 115nF, 15 to 60mA |
Attenuation: | > 14dB, 15 to 60mA |
Bandwidth: | 300 to 3500Hz, 15 to 60mA |
Impedance while ringing: | > 2kΩC = 0.47µF, 25 to 50Hz |
Ringtone detection sensitivity: | 10 to 20V, 25 to 50Hz |
Pulse dialling: | 40 / 60ms |
Tone-dial levels: | -9.0 +2.0/-2.5dB and -11.0dB +2.5/-2.0dB, 15 to 60mA |
Power surge protection – differential between A, B leads: | 1000V (8 / 20µs) |
Note: Any ringing sequence is acceptable. |
Switch parameters | |
Minimum voltage: | 9V AC or DC |
Minimum voltage: | 24V AC or DC |
Maximum current: | 1A AC or DC |
Resistance – open: | min 400kΩ |
Resistance – closed: | approx. 0.5Ω |
Fuse: | resettable |
Connection of external indicator elements | |
Power supply voltage: | 12-24V DC, external source |
Maximum switching current: | 200mA |
Other parameters | |
Dimensions of the Universal implementation: | 2.559 × 5.118 × 0.945 inch |
Dimensions of the Kompakt implementation: | 3.937 × 7.283 × 0.63 inch |
Operating temperature range: | -4°F – 158°F |
Show more
Comparison Table of Lift Phones
Compare important functions of 2N lift phones with the help of this handy comparison table. Choose the right model of IP intercom for your specific need.
Compare